Osram PLT5 450B 80mW 450nm 12mm Copper Module W/Driver & DTR-3E-B Glass Lens

Description

Listing is for a single
12mmX30mm
Osram PLT5 450B 80mW 450nm
Copper Module W/Boost Driver & DTR-3E-B Glass Lens. Module can be run off a single rechargeable 3.7V Li-Ion or variable power supply or just a simple 5V 1A wall adapter. Unit is ready to be dropped into your final project. Just place in a heatsink fit for a standard 12mm type laser module and apply 3-5V from a 1A+ capable power supply.
The copper module is not the common low grade copper units being offered around but precision machined
Genuine C1100 99.9% Pure Copper +/-0.01mm with tolerances for max
thermal
conductivity
for a stable output and best life from the diode.
Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering.
Here is what you get. The driver is contained in the back of the module.
You can discard the back half if you need the extra room just be careful not to let the driver short on anything.:)
Wire assignment is:
Red +
Black -
Specs
Wavelength                                     450nm +/- 5nm
Input Voltage                                   3V-6V
Driver Output Current                     225mA(default)
Driver Current Draw                       600mA +/- 0.15A
Power Output                                  100mW-180mW
Driver Type                                     Constant Current
Lens                                                 DTR-3E-B Glass Lens
Duty Cycle                                       Continuous with proper heatsinking
PLT5 450B 450nm Laser Diode
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.