Oclaro HL63193 638nm 700mw Red Laser Module W/Leads

Description

Listing is for a brand new single Oclaro 700m
W
638nm laser diode Mounted in a copper 12mm module with leads.
The copper module upgrade provides a huge  improvement  in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode.
Please Note this unit comes with an acrylic lens in it. It is for those that want to use their own lens solution. It will keep dust and contaminates out of the module until you are ready to put yours in. Replace with lens of choice. Threading is M9X0.5 which is the most common threading used. The best options are the Three element Glass Lens or the 405-G-2 Lens.
Oclaro HL63193 638nm 700mw Diode
.
Data Sheet
Save yourself the headache of pressing and soldering. Just add heatsink and proper laser driver with t
he current limited to no more than 1100mA. Don't attempt to connect directly to a battery or you will damage this diode.
This is the diode that everyone has been talking about.
Modules are fully tested to be in working order and the leads will have the ends twisted and soldered together for ESD protection. Please use all ESD precautions and short your driver leads discharging any capacitors before hooking up your driver to this module.
Here is what you get. Module is 12mm(11.96mm)X30mm.
Wire assignment is:
Red +
Black -
Please note
These are multi-mode display diodes similar to the 1W+ 445nm diodes. Check these threads for info on output and beam correction.
Inexpensive, decent correction for 300mW Mitsubishi 635nm laser @ 94% transmission
Rayfoss/Mitsubishi 638nm 300mW laser diode
Mitsubishi ML520G71...Red Holy Grail or Flashlight Fail ??
Here are some more threads about these diodes.
It is Here.!!!!! 300mW "635nm" Mitsubishi.....
Correcting the beam of the 300mW 638nm diodes
Mitsubishi 635nm diode divergence at 350 feet
The "Echo" - 500mW 635nm DIY Red
Mitsubishi 638nm 300mW laser diode melting CD case
Canon DSLR beamshots of 638nm and 445nm laser
.
Oclaro 700mW 638nm Diode (HL63193MG)
405-G-2(real not china clone) collimated spot comparison with Mitsu G71 638nm 300mW diode.
So with that said lets get on with the power test.
So there we have it the Oclaro 700mW 638nm diode.
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.