NDB7875 445nm 9mm Copper 445nm Blue Laser Module W/X-Drive & Glass Lens

Description

Listing is for a single
NDB7875 445nm laser module. Unit is upgraded with a high thermally conductive copper module for max cooling and stability. It is prewired with a 2.4A bucking laser driver and comes with a three element(Aixiz) glass lens
. The unit is ready to be dropped into your final project. No setting current or soldering diode to driver. Just place in heatsink and connect leads to your power supply.
Input voltage range is 6V-9V. Great for use with two Li-Ion's or Lipo's. Suggest two 16340/18350/18650 3.7V Li-Ion's or 3.2V Lipo's. You can also use a 6-8V 2A wall adapter or bench power supply.
Here is what you get.
The X-Drive is encased in the back of the model connected to the diode.
Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering.
Wire assignment is:
Red +
Black -
Wavelength                                      445nm +/- 5nm
Input Voltage                                    6V-8.4V
Driver Output Current                      2400mA
Driver Current Draw                        1.7A +/- 0.5A
Power Output                                    2.2W-2.7W
Driver Type                                       Constant Current
Lens                                                  M9x0.5mm Threaded Three Element Glass Lens
Reverse Polarity Protection              Yes
Duty Cycle                                        120 seconds on 30 seconds off with proper heatsinking
NDB7875 9mm 445nm Laser Diode
Here is a quick power test on this diode with a G-2 Lens
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.