900mW 405nm Blu-Ray BDR-209 Laser Diode In Copper Module W/Leads & G-2 Glas Lens

Description

Listing is for a single 900mW 16X 405nm BDR-209 Blueray Diode in a standard high quality DTR
12mmX30mm
copper module with leads and DTR-G-2 glass lens. This is the most powerful single mode 405nm diode currently
available
.
The copper module is made from pure C1100 99.9% and precision machined with +/-0.01mm tolerances  providing amazing
thermal
conductivity
over other modules being sold.
Effectively
moving the heat away from the diode to your heatsink giving a stable output from the diode.
When driven @ 600mA you can expect 900mW+ with a DTR-G-2 lens and 650mW+ with a DTR-3E-B glass lens with these diodes.
Save yourself the headache of extracting, pressing and soldering on your diode. Just add host, heatsink and a proper laser driver.
The current must be limited to no more than 600mA to the diode suggest 500mA for best life expectancy.
Don't attempt to connect directly to a battery you need a laser driver to power this diode. I do offer a boost driver that is  capable of driving this diode off a single Li-Ion see my other offerings below.
All modules are tested and are in working condition prior to shipping.
Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering.
Wire assignment is:
Red +
Black -
After mounting it up time for a power test using a 405-G-2 lens.
Graph courtesy of ARG.
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.