20W Module DIY Kit 450nm Professional Continuous 5.5W Cutting / Y6Z4

Description

Features:
Can be used for laser cutting machine, engraving machine, , DIY .
diodes, high-quality LD capping technology, ensure service .
Built-in driver board, 40mm threaded copper core with thermal grease compound, temperature , NEJE factory 48 hour 100% aging test, ensure long working.
New lens, clear , not stray light, adjustable focal length.
Can carving / cutting MDF, balsa, paper, wood, fabric, , leather, plywood, foam paper, anodized aluminum, etc.(Not suitable for iron or other metal)
Specifications:
Material: ABS+ aluminum
Luminous Color: Blue
Section Size: 30 * 30mm / 1.18 * 1.18in
Cooling Mode: 40mm copper core + heat sink + thermal silicone grease + 15000 rpm cooling fan
Adapter Plug: plug
Adapter Input Voltage: AC100~240V UL certification
Adapter Output Voltage: DC12V, 2A
Can Engrave: MDF/balsa/paper/wood/fabric//leather/plywood/foam paper/anodized aluminum
Can NOT Engrave: Metal/glass/stone/ceramics//stainless steel/reflective material/ transparent material
PWM/Temperature Tester Board Specification:
Input: DC12V
Output: PH2.0 4pin (, GND, PWM/TTL, temperature)
Mode: 3 modes (off, manual pwm, pwm / ttl in)
Temperature Display: Yes
PWM Display: Yes
Manual PWM Control: Yes
Technical Parameters:
Module Input: 18-20W
Output : 5.5W (5500mW)
Wavelength: 445-450nm
Beam Shape: Dot (focusable)
Working Voltage: DC12V
TTL&PWM Modulation: YES, compatible with both TTL & PWM modulation
Input Voltage: DC12V
PWM/TTL Input: DC3.3~
Input Interface: PH2.0-4Pin (+,-, PWM/TTL, temperature), 3Pin (+,-, PWM/TTL), 2Pin+2Pin (+,-) + (PWM/TTL,-)
NOTE: Temperature interface can be disconnected, NEJE provides text instructions for temperature acquisition on wiki.
Drive Mode: External ACC
Temperature : <70℃
: 20,000 hours
Module Weight: 202g(The the weight, the smaller the move inertia, the better the performance)
Item Size: 80 * 30 * 30mm / 3.15 * 1.18 * 1.18in
Package Weight: 700g / 24.69oz
Package Size: 36 * 16 * 11cm / 14.17 * 6.30 * 4.33in
Module Test:
Material: Plywood, thickness 3mm
Speed 330, cutting 3 times, each cutting 1.0mm
Speed 200, cut 2 times, each cut 1.5mm
Speed 100, cut once, cut 3mm each
Packing List:
1 * 5.5W Engraving Module
1 * Module Sliding Fixture
1 * 4 Pin Cable(1000mm)
1 * NEJE PWM/Temperature Tester Board
1 * -240V 12V2A UL Certified
1 * Euro Adapter
1 * 2.5mm L-shaped Wrench
1 * 5mm L-shaped Wrench
1 *
Note(Please pay attention):
1. Please wear during usage and touching the directly with your eyes and skin!
2. Do not engrave mirror objects, pay attention to fire, pay attention to pets when working!
3. will be generated when burned, please pay attention to exhaust indoors.
4. This module is compatible with our NEJE machine.